Dell EMC VxFlex Ready Node 14G, Руководство по установке оборудования

Страница: 73 / 86

3. If the system does not use a CMA, use the two velcro straps to route and
secure cords and cables at the rear of the system:
a. Locate the CMA bracket slots on the rear end of both the rails.
b. Bundle the cables gently, pulling them clear of the system connectors to the
left and right sides.
Note
Ensure that there is enough space for the cables to move when you slide the
system out of the rack.
c. Thread the straps through the CMA bracket slots on each side of the system
to hold the cable bundles.
Figure 34 CMA bracket slots
2U1N Configuration Equipment Installation
Connect and route cords and cables 73