Dell EGW-5200 Скачать руководство пользователя страница 34

Страница: 34 / 78

Figure 30. CPU Configuration (bottom of screen)

Table 23. CPU Configuration

Parameter

Settings

Description

Hyper-Threading

Disabled,

Enabled

Enabled for Windows XP and Linux (OS optimized for Hyper-
Threading Technology) and Disabled for other OS (OS not
optimized for Hyper-Threading Technology).

Active Processor Cores

All

, 1, 2, 3, 4, 5, 6, 7, 8

Number of cores to enable in each processor package.

Intel (VMX) Virtualization
Technology

Disabled,

Enabled

When enabled, a VMM can utilize the additional hardware
capabilities provided by Virtualization Technology.

Intel Trusted Execution
Technology

Disabled

, Enabled

Enables utilization of additional hardware capabilities provided
by Intel Trusted Execution Technology.

Intel(R) SpeedStep(tm)

Disabled

, Enabled

Allows more than two frequency ranges to be supported.

Intel(R) Speed Shift
Technology

Disabled,

Enabled

Enable/disable Intel Speed Shift Technology support. Enabling
will expose the CPPC v2 interface to allow for hardware-
controlled P-states.

Turbo Mode

Disabled,

Enabled

Enable/disable processor Turbo Mode (requires Intel Speed
Step or Intel Speed Shift to be available and enabled).

C states

Disabled,

Enabled

Enable/disable CPU Power Management. Allows CPU to go to
C states when it is not 100% utilized.

BIOS Setup

Содержание EGW-5200















































































Результаты поиска

Содержание EGW-5200

Отзывы:

Dell EGW-5200, Руководство пользователя, Страница: 34 / 78

Результаты поиска

Содержание EGW-5200

Отзывы: