Dell EGW-5200 Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 78

Dell EGW-5200 Скачать руководство пользователя страница 30

BIOS Setup

The Basic Input/Output System (BIOS) is a program that provides a basic level of communication between the processor and
peripherals. In addition, the BIOS also contains codes for various advanced features of the EGW-5200. The BIOS setup program
includes menus for configuring settings and enabling features of the EGW-5200. Most users do not need to use the BIOS setup
program, as the EGW-5200 ships with default settings that work well for most configurations.

Enter BIOS setup by selecting

DEL

or

ESC

when the system is powered on and the POST (Power On Self Test) message is

displayed. The EGW-5200 controller supports a one-time Boot Menu allowing selection of a boot device. Enter the Boot Menu
by selecting

F7

at POST.

Note the following BIOS setup details:

●

The default password is <service tag>! (include exclamation point).

●

BIOS options listed are for reference only.

●

Different configurations can affect BIOS behavior.

●

Displayed material may reflect only the BIOS version corresponding to the initial release and may differ from that of the
purchased motherboard.

●

Users can download the latest BIOS version from the EGW-5200 page of the Dell Technologies

site, under the

Drivers & Downloads

tab.

Topics:

•

•

•

•

•

•

•

B

30

BIOS Setup

«
...
28
29
30
31
32
...
»

Содержание EGW-5200















































































Отзывы:

Нет отзывов