Steps
1.
Align the slots on the system cover with the tabs on the chassis.
2.
Push the system cover latch down to move the system cover into the closed position.
The system cover slides forward and the slots on the system cover engage with the tabs on the
chassis. The system cover latch locks into place when the system cover is completely engaged with
the tabs on the chassis.
3.
Rotate the latch release lock clockwise to the locked position.
Next steps
1.
If removed, install the front bezel.
2.
Reconnect the peripherals and connect the system to the electrical outlet.
3.
Turn on the system, including any attached peripherals.
Related Links
Installing the optional front bezel
Safety instructions
Inside the system
Figure 9. Inside the system—four 3.5-inch hot-swappable hard drive systems
1.
control panel module
2.
hot-swappable hard drive (4)
3.
intrusion switch
4.
power supply unit
5.
expansion card riser
6.
memory module (A1, A2, A3, A4)
53
