Dell D630 - LATITUDE ATG NOTEBOOK, Руководство пользователя

Страница: 159 / 218

Adding and Replacing Parts
159
4 If you are replacing a memory module, ground yourself and remove the
existing module:
a
Use your fingertips to carefully spread apart the securing clips on each
end of the memory module connector until the module pops up.
b
Remove the module from the connector.
5 Ground yourself and install the new memory module:
NOTE:
If the memory module is not installed properly, the computer may not boot
properly. No error message indicates this failure.
a
Align the notch in the module connector with the tab in the
connector slot.
b
Slide the module firmly into the slot at a 45-degree angle, and rotate
the module down until it clicks into place. If you do not feel the click,
remove the module and reinstall it.
1
securing clips (2 per connector)
2
memory module
2
1