Dell C1660w Color Laser Print Скачать руководство пользователя

Страница: 33 / 240

Connecting Your Printer

WPS-PBC (Wi-Fi | WPS Button)

You can start WPS-PBC (Wi-Fi Protected Setup-Push Button Configuration) by pressing the

(Wi-Fi | WPS)

button.

NOTE:

WPS-PBC is available only when the wireless LAN access point (Registrar) or router supports WPS-PBC.

NOTE:

Before starting WPS-PBC with the

(Wi-Fi | WPS) button, confirm the position of the WPS button (button name may

vary) on the wireless LAN access point (Registrar) or router. For information about WPS operation on the wireless LAN access

point (Registrar) or router, refer to the manual supplied with the product.

NOTE:

For more information on the

(Wi-Fi | WPS) button, see "Status of Wi-Fi | WPS Button Backlight" on page 78.

If a problem occurs or error messages are displayed on the operator panel, see "Wireless Problems" on page 224.

Press and hold the

(Wi-Fi | WPS) button on the printer for 2 seconds.

Ensure that the

(Wi-Fi | WPS) button starts to flash and

Press WPS Button on Router

appears on

the operator panel.

Start the WPS operation on the wireless LAN access point (Registrar) or router within two minutes.

When the WPS operation is successful and the printer is rebooted, wireless LAN connection setting is completed.

WPS-PBC (Operator Panel Menu)

You can start WPS-PBC (Wi-Fi Protected Setup-Push Button Configuration) from the operator panel.

NOTE:

WPS-PBC is available only when the wireless LAN access point (Registrar) or router supports WPS-PBC.

NOTE:

Before starting WPS-PBC, confirm the position of the WPS button (button name may vary) on the wireless LAN access

point (Registrar) or router. For information about WPS operation on the wireless LAN access point (Registrar) or router, refer to

the manual supplied with the product.

NOTE:

A Password is required to enter

Admin Menu

when

Panel Lock Set

is set to

Enable

. In this case, enter

the password you specified, and press

the

(Set) button.

Press the

(Menu)

button.

Press the button until

Admin Menu

appears, and then press the

(Set)

button.

Press the button until

Network

appears, and then press the

(Set)

button.

Press the button until

WPS Setup

appears, and then press the

(Set)

button.

Ensure that

Push Btn. Ctrl

appears, and then press the

(Set)

button.

Ensure that

Are you sure?

appears, and then press the

(Set)

button.

Ensure that

Press WPS Button on Router

is displayed, and start the WPS-PBC on the wireless LAN

access point (Registrar) or router within two minutes.

When the WPS operation is successful and the printer is rebooted, wireless LAN connection setting is completed.

Содержание C1660w Color Laser Print

















































































































































































































































Результаты поиска

Содержание C1660w Color Laser Print

Отзывы:

Похожие инструкции для C1660w Color Laser Print

Бренды по названию

Популярные бренды

Dell C1660w Color Laser Print, Руководство пользователя

Результаты поиска

Содержание C1660w Color Laser Print

Отзывы:

Похожие инструкции для C1660w Color Laser Print

Бренды по названию

Популярные бренды