5. Make sure the paper support and paper exit tray are dry before beginning a new print job.
Restoring Factory Default Settings
Menu settings marked with an asterisk (*) indicate the active settings. You can restore the original
printer settings, often referred to as the
factory default settings
.
1. Make sure the printer is on.
2. Press the down
Arrow
button to scroll to Maintenance, and then press the
Select
button .
3. Press the down
Arrow
button to scroll to Reset Defaults, and then press the
Select
button .
4. With Yes highlighted, press the
Select
button .
NOTE: If a network adapter is attached to the printer, Also reset all Network Settings to
factory defaults? appears. Press the left or right
Arrow
button to select Yes or No, and
then press the
Select
button .
Restoring Language to Factory Default
You can restore the language on your display to factory default without using the printer menus.
NOTE: Using this key sequence will also restore all other selected settings to factory default.
1. Turn your printer off.
2. Press and hold the
Start
button and the
Cancel
button .
3. While holding the
Start
button and the
Cancel
button , press and release the
Power
button
.
4. Continue holding the two buttons until the
Initial Setup
screen appears.
5. Press the left or right
Arrow
button to select your language and country. Press the
Select
button to save each selection.
6. Use the keypad to enter the time, date, your fax number, and your fax name. Press the
Select
button to save each selection.
The printer aligns the ink cartridges after your final selection.
NOTE: Some settings such as phone lists, time, date, and country are not changed.
Содержание 968
Страница 100: ...3 Close the top cover ...