manualshive.com logo in svg

Dell 5230DN, Руководство по обслуживанию

Поделиться
Скачать
Dell 5230DN Скачать руководство пользователя страница 263

Diagnostic aids

3-57

Wipe Disk

This setting provides you with a tool for erasing the contents of a disk. 

Warning:  

Wipe Disk removes a disk's data in such a way that it cannot be recovered. 

To change this setting:

1.   

Touch  

to 

select 

Wipe Disk 

from Configuration Menu.

Note:  

If an advanced password has been established, you must enter this password in order to change 

the setting. If no advanced password exists, you can establish one by using the keyboard that appears on 
the LCD.

2.   

Touch  

to 

select 

Wipe disk (fast) or Wipe disk (secure)

.

Contents will be lost. Continue?

 appears on the touchscreen.

3.   

Touch 

Back

 to return to Configuration Menu. 

4.   

Touch 

Yes

 to continue, or touch 

No

 to exit.

Font Sharpening

This setting allows a user to set a text point size below which the high frequency screens are used when 
printing font data. For example, at the default 24, all text in font sizes 24 and less will use the high frequency 
screens. The values for this setting range from 0 to 150, and the default value is 24. This setting affects 
PostScript, PCL, and XL.

To change this setting: 

1.   

Touch  

to 

select 

Font Sharpening

 from the Configuration Menu.

2.   

Touch 

 to increase the value or 

 to decrease the value.

3.   

Touch 

Submit

 to save the change.

Touch 

Back

 to cancel and return to the Configuration Menu. 

This function is not supported when the device generates output at 600 dpi resolution.

Require Standby

This setting determines if the Standby Mode is On or Off. The default is On.

If Standby Mode is On, the printer begins functioning in Standby Mode when it remains idle for an amount of 
time. The Standby Mode enables the printer:

•

To consume less energy than when operating in normal mode but not as little as when operating in Power 
Saver

•

To return to the Ready state more quickly than when operating in Power Saver 

To change this setting: 

1.   

Touch  

to 

select 

Require Standby

 from the Configuration Menu.

2.   

Touch 

Submit

 to save the change.

Touch 

Back

 to cancel and return to the Configuration Menu. 

Содержание 5230DN











































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды