manualshive.com logo in svg

Dell 5230DN, Руководство по обслуживанию

Поделиться
Скачать
Dell 5230DN Скачать руководство пользователя страница 208

3-2

Service Manual

There are different test menus that can be accessed during POR to identify problems with the printer.

To run the printer diagnostic tests described in this chapter, you must put the printer in Diagnostic Mode.

8

Menu

Opens the menu index

Note:

The menus are available only when the printer is in the 

Ready

 state.

9

USB

Insert a flash drive into the front of the printer to print saved files.

Note:

Only the front USB port supports flash drives.

Diagnostics Mode

1. Turn off the printer.
2. Press and hold 

 and 

.

3. Turn on the printer.
4. Release the buttons after 10 

seconds.

The Diagnostics Mode group contains the settings 
and operations used while manufacturing and 
servicing the printer. 

Configuration Menu

1. Turn off the printer.
2. Press and hold 

 and 

.

3. Turn on the printer.
4. Release the buttons after 10 

seconds.

The Configuration Menu group contains a set of 
menus, settings, and operations which are 
infrequently required by a user. Generally, the 
options made available in this menu group are 
used to configure a printer for operation. 

See

“Configuration menu (CONFIG MENU) 

Flash system code 
mode

1. Turn off the printer.
2. Press and hold 

, 

, 

and

.

3. Turn on the printer.
4. Release the buttons after 10 

seconds.

Item

Description

Accessing service menus (models 5230n/dn, 5350dn, and 5530dn)

See

“Diagnostics mode (models 5230n/dn,  

5350dn, and 5530dn)” on page 3-3

 for more 

information.

(models 5230n/dn, 5350dn, and 5530dn)” on 

page 3-25

 for more information.

Содержание 5230DN











































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды