Dell 5230DN Скачать руководство пользователя страница 172

Страница: 172 / 586

2-138

Service Manual

Sensor (duplex input) static jam service check.

Use this procedure for the following jams:

• 230.13

• 238.01

• 238.03

• 238.05

• 238.07

Step

Check

Yes

Check media origination.

Did the media originate from the internal duplex?

Go to step 2

Go to step 5

Check the media path for partially fed or jammed media.

Is the media path free from partially fed or jammed media?

Go to step 3.

Remove any pre-
staged or jammed
media.

Check the sensor (duplex input) for proper operation.

Does the display on the operator panel, change every time
the sensing area of the above sensor is interrupted or
blocked.

Go to step 7.

Go to step 4.

Check the above sensor for proper connection.

Is the above sensor connected properly?

Replace the
sensor (duplex
input).

Go to

“Sensor

(duplex input)

Replace the
connection.

Is the media path free from partially fed or jammed media?

staged or jammed
media.

Check the sensor (duplex input) for proper operation.

Does the display on the operator panel, change every time
the sensing area of the above sensor is interrupted or
blocked.

Go to step 7.

Replace the
external duplex
assembly.

Perform a print test using the duplex.

Does the problem remain?

Contact next
highest level of
tech support.

Problem solved.

4. Observe the line item “input”.

3. Select sensor test.

2. Select Duplex tests.

1. Enter the diagnostic mode.

4. Observe the line item “input”.

3. Select sensor test.

2. Select Duplex tests.

1. Enter the diagnostic mode.

removal (5350dn,

page 4-69

5530dn, and

Check the media path for partially fed or jammed media.

Go to step 6.

Remove any pre-

T656)” on

Содержание 5230DN











































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 5230DN

Отзывы:

Похожие инструкции для 5230DN

Бренды по названию

Популярные бренды

Dell 5230DN, Руководство по обслуживанию

Результаты поиска

Содержание 5230DN

Отзывы:

Похожие инструкции для 5230DN

Бренды по названию

Популярные бренды