Dell 5230DN Скачать руководство пользователя страница 260

Страница: 260 / 586

3-54

Service Manual

Factory Defaults

This setting enables a user to restore all the printer settings to the original factory settings. Selections are

Embedded Solutions applications (LES).

Network does not appear unless you have a network printer. The following settings are not changed:

•

Display language

•

Settings in the NETWORK/PORTS MENU group.

To reset factory defaults:

Touch

to select Factory Defaults from the Configuration Menu.

Touch

to select either Restore Base, Restore STD NET, or Restore LES.

Note:

There is no confirmation, and selecting one of these settings immediately takes effect. The printer

restarts and returns to Ready state.

Restoring Factory Defaults

and then

Resetting the Device

are displayed.

Energy Conserve

This menu controls what values appear on the Power Saver menu. If

Off

is selected in Energy Conserve

menu, then Disabled appears in the Power Saver menu, and Power Saver can be turned off. If

is set in

Energy Conserve, the Power Saver feature cannot be disabled.

Touch

select

Energy Conserve

from the Configuration Menu.

The panel displays the setting's name in the header and

[

setting's current value

]

below the header

row. Touch

to change the setting. The selections are On and Off. The default is On.

Touch

Submit

to save your change.

Touch

Back

to exit without changing the value.

Factory Defaults

Restore Base

Restore LES

Restore STD Net

Back

Restore Base, Restore STD NET

, or

Restore LES

. Restore LES enables you to remove all LXK

Содержание 5230DN











































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 5230DN

Отзывы:

Похожие инструкции для 5230DN

Бренды по названию

Популярные бренды

Dell 5230DN, Руководство по обслуживанию

Результаты поиска

Содержание 5230DN

Отзывы:

Похожие инструкции для 5230DN

Бренды по названию

Популярные бренды