manualshive.com logo in svg

Dell 5230DN, Руководство по обслуживанию

Поделиться
Скачать
Dell 5230DN Скачать руководство пользователя страница 218

3-12

Service Manual

3.

Load plain media in Tray 2, and then press 

Continue

. The test page will be printed.

DUPLEX TESTS 

Quick Test (duplex)

This test prints a duplex version of the Quick Test that can be used to verify that the correct placement of the 
top margin on the back side of a duplex page. You can run one duplexed page (

Single

), or continue printing 

If the page looks like this:

If the page looks like this:

Then step 3 of the test passed and 
the RFID Option Test is complete. 
The RFID firmware and hardware 
are working properly.

Then the test has failed. 

This is an indication that the printer 
was able to read an RFID tag when 
it was not supposed to.

Possible causes:

1. RFID media was printed 

instead of plain media.

2. A separate RFID tag may be 

placed in close proximity to the 
RFID option.

3. RFID UHF option failure

Try the test again, making sure that 
plain media is used for step 3. If the 
test fails again, inspect the printer 
to make sure there are no RFID 
tags in close proximity to the RFID 
option. For example, it an RFID tag 
was applied to the printer front 
cover itself, this tag may be 
causing problems with the RFID 
reader. If no problems found, 
replace the RFID UHF option.

Step 3.

If this image

Step three is complete.

appears at the bottom of this sheet, the

test is a SUCCESS.

Step 3.

If this image

Step three is complete.

appears at the bottom of this sheet, the

test is a SUCCESS

RFID Option Test

RFID Option Test

Содержание 5230DN











































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды