Dell 5230DN Скачать руководство пользователя страница 137

Страница: 137 / 586

Diagnostic information

2-103

sensor failure.

not provide toner level
feedback or the print cartridge
is damaged.

wheel on the print cartridge
for damage and replace the
print cartridge if needed.

2. Check the sensor (toner

empty) for proper
operation. See

“Sensor

(toner empty) service

check” on page 2-148

929.03

Sensor (toner empty)
sensor failure.

The sensor (toner empty) does
not provide toner level
feedback or the print cartridge
is damaged.

1. Check the toner pulse

wheel on the print cartridge
for damage and replace the
print cartridge if needed.

2. Check the sensor (toner

empty) for proper
operation. See

“Sensor

(toner empty) service

check” on page 2-148

930.00

Incorrect printhead or
intermittent Hsync

A non supported printhead is
installed. Hsync signal is

Replace the printhead
assembly. Go to

“Printhead

931.00

No first laser H sync

The hsync signal is missing or
not at the correct voltage.

Replace the printhead
assembly. Go to

“Printhead

932.00

Printhead lost laser H
syncs.

The hsync signal is missing or
not at the correct voltage.

Replace the printhead
assembly. Go to

“Printhead

933.00

Polygon mirror motor
locked. No first laser

The hsync signal is missing or
not at the correct voltage.

Replace the printhead
assembly. Go to

“Printhead

motor may have been
corrupted, or the cable may be
loose, or the motor may be
bad.

the printhead assembly.

2. Check all connections on

the system card assembly.

3. Replace the printhead

assembly. Go to

“Printhead assembly

page 4-60

“Printhead

Error

code or

message

Error contents

Description/Action

Possible repair actions

assembly removal (5350dn,

H sync received.

assembly removal (5230n/dn)”

on page 4-60

“Printhead

934.00

Mirror motor lost lock.

The signals driving the polygon

1. Check all connections on

removal (5230n/dn)” on

assembly removal

(5350dn, 5530dn, and

T656)” on page 4-61

assembly removal (5230n/dn)”

on page 4-60

“Printhead

assembly removal (5350dn,

assembly removal (5230n/dn)”

on page 4-60

“Printhead

assembly removal (5350dn,

929.02

Sensor (toner empty)

The sensor (toner empty) does

1. Check the toner pulse

intermittent or noisy. Printhead

assembly removal (5230n/dn)”

ID resistor circuit is not to spec.

on page 4-60

“Printhead

assembly removal (5350dn,

5530dn, and T656)” on

page 4-61

5530dn, and T656)” on

page 4-61

5530dn, and T656)” on

page 4-61

5530dn, and T656)” on

page 4-61

Содержание 5230DN











































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 5230DN

Отзывы:

Бренды по названию

Популярные бренды

Dell 5230DN, Руководство по обслуживанию

Результаты поиска

Содержание 5230DN

Отзывы:

Бренды по названию

Популярные бренды