Dell 302-004-341, Руководство пользователя

Страница: 62 / 70

l
<myip> is the NFS/CIFS server IP
Note
The default password is Scaleio123.
7. Enable the iDRAC VirtualCD to boot once using these Remote RACADM
commands:
racadm -r <dracIP> -u root -p <password> set
iDRAC.ServerBoot.BootOnce Enabled
racadm -r <dracIP> -u root -p <password> set
iDRAC.ServerBoot.FirstBootDevice VCD-DVD
8. Verify that the server is in a state in which it can be power-cycled. (The OS
should be in maintenance mode, as needed).
9. Power-cycle the ScaleIO Ready Node server:
racadm -r <dracIP> -u root -p <password> serveraction
graceshutdown
10. Repeat steps 6 on page 61 - 9 on page 62 for each ScaleIO Ready Node server
needing the BIOS and firmware updates and configuration. All servers can be
updated in parallel.
11. Wait for the configuration and firmware updates to complete. The server
console screen will indicate when the script is complete.
WARNING
Do not reboot the ScaleIO Ready Node server while the update process is
being performed!
The iDRAC will be reset several times during the update process. This causes
the iDRAC virtual console viewer to close, virtual media to disconnect, and the
iDRAC browser window to be unavailable for several minutes during each reset.
The hardware update scripts will continue to run from RAM on the server.
The update script will generate a log indicating whether each configuration and
firmware flash is successful.
12. (Optional) Check each ScaleIO Ready Node server's log for successful
competition:
a. Connect to the iDRAC KVM console screen.
b. After the update script completes, press Alt+F2 to access a user console,
and then Enter to log in.
c. Check the log contents for errors:
less /bundleapplicationlogs/apply_components.log
For more information, see Troubleshooting the Hardware ISO on page 65 .
Reference Material
62 Hardware Configuration and Operating System Installation Guide - Windows Servers