Dell 302-004-341 Скачать руководство пользователя страница 58

Страница: 58 / 70

3. Match a VD to a device path:

a. Run:

wmic diskdrive get deviceid,scsitargetid,interfacetype |

findstr /c:"SCSI"

Output similar to the following is displayed:

b. In the SCSITargetId column, find the

VD number

c. Match

PhysicalDriveX

under DeviceI D on the same line.

In the above output, the

PHYSICALDRIVE6

attribute shows the

SCSITargetId

value as 3. This correlates to the device with a

DG/VD

3/3, as shown in the figure in the previous step.

4. Ensure that all devices are online and initialized:

a. From the Windows Start menu, open Disk Management.

The Disk Management screen appears.

b. Change the state of every ScaleIO device that is offline to online by right-

clicking it and selectingOnline.

c. Check whether the state of any devices to be used by ScaleIO is Not

Initialized.

d. Change the state of each device that is not initialized by right-clicking it and

selecting Initialized.

WARNING

Do not change the state of an Initialized device. Contact your
Administrator for support.

Preparing Disks to add to a ScaleIO SDS

Hardware Configuration and Operating System Installation Guide - Windows Servers

Содержание 302-004-341







































































Результаты поиска

Содержание 302-004-341

Отзывы:

Похожие инструкции для 302-004-341

Бренды по названию

Популярные бренды

Dell 302-004-341, Руководство пользователя

Результаты поиска

Содержание 302-004-341

Отзывы:

Похожие инструкции для 302-004-341

Бренды по названию

Популярные бренды