Dell 302-004-341, Руководство пользователя

Страница: 61 / 70

l
Local - Supports running RACADM commands from the managed server's
operating system. To run local RACADM commands, install the OpenManage
software on the managed server. Only one instance of Local RACADM can be
executed on a system at a time.
l
SSH or Telnet (also known as Firmware RACADM) - Firmware RACADM is
accessible by logging in to iDRAC using SSH or Telnet.
l
Remote - Supports running RACADM commands from a remote management
station such as a laptop or desktop running Windows or Linux. To run Remote
RACADM commands, install the DRAC Tools utility from the OpenManage
software on the remote computer.
Note
For information regarding RACADM commands, see the RACADM CLI Guide .
Update the hardware using remote RACADM
You can install and execute the Dell RACADM tool from any management system with
access to the iDRAC network. The remote RACADM command set is useful in this
situation to mount and execute the Hardware ISO to a large number of ScaleIO Ready
Node servers. This prevents the need for multiple web browser windows and manual
keyboard and mouse clicks for each server.
Procedure
1. Configure a laptop or server with access to the iDRAC network.
2. Install the Dell DRAC tools, including RACADM:
a. In any Internet browser, go to the RACADM Command Line Interface for
DRAC page in the Dell Systems Management wiki.
b. Follow the instructions for downloading and installing Remote RACADM for
your operating system.
3. Download the ScaleIO Ready Node Hardware Update Bootable ISO from the
ScaleIO Ready Node page and make it accessible on the network share folder.
4. Create a CIFS or NFS network share that includes the Hardware ISO. The share
will need to be accessible to the iDRAC network.
Refer to OS vendor guidelines for instructions on how to create CIFS
(windows) or NFS (Linux or XenServer) shares
5. Open a terminal/command prompt with superuser/administrator accessibility.
This prompt should allow execution of the RACADM utility.
6. Mount the Hardware ISO to the iDRAC from the remote share:
racadm -r <dracIP> -u root -p <password> remoteimage -c -u
<myuser> -p <mypass> -l // <myip> /SIORN/ScaleIO-Ready-Node-
Hardware-Update-for-Dell_2.0.1.iso
Where:
l
<dracIP> is the iDRAC IP address
l
<password> is the password for the server
l
<myuser> is the NFS/CIFS share username
l
<mypass> is the NFS/CIFS share password
Reference Material
Dell OpenManage DRAC Tools (RACADM) 61