Dell 19P76, Руководство по обслуживанию

Страница: 37 / 90

Steps
1. Align and place the power button with fingerprint reader assembly on the system and adhere it to the palmrest.
2. Align and place the power button with fingerprint reader bracket in place, and install the three (M1.5x2.5) screws.
3. Fold back the display hinge and install the three (M2.5x5) screws to secure it.
Next steps
1. Install the I/O daughter board .
2. Install the system fan .
3. Install the base cover .
4. Install the SIM card tray
5. Install the microSD card .
6. Follow the procedure in After working on your computer .
Battery
Removing the 4-cell battery
Prerequisites
1. Follow the procedure in before working inside your computer .
2. Remove the microSD card .
3. Remove the SIM card tray .
4. Remove the base cover .
NOTE: If battery was disconnected from system board for service, there will be a delay during system boot-up as the
system will undergo RTC battery reset.
About this task
The following images indicate the location of the battery and provide a visual representation of the removal procedure.
Removing and installing components 37