Delios DLS 300 Скачать руководство пользователя

Страница: 54 / 64

Code 240.010.0001

DLS 300 / 450 / 600

8.4 Disinstallation

Before starting any maintenance operations, make sure that the system has been switched off, and that the

AC line external main switch has been set to off.

If an auxiliary power generator is available, before starting any maintenance operations, make sure that

the UPS has been switched off and that the AC line external switch coming from the UPS has also been

switched off.

Wait at least 10 min. before removing the DLS from the wall.

The DLS external casing could overheat and cause burns if touched.

Do not carry out other operations on the DLS system for at least 10 min. The DLS system contains capaci-

tors which require a minimum time to discharge.

The batteries produce electricity and may cause electric shocks or fires in the event of a short-circuit or

incorrect installation.

The wires coming from the solar panels are always live. The voltage from a string of solar panels could

reach 600 V!!

Before starting to uninstall the system, make sure that the battery cables are disconnected from the battery

and that the poles are isolated to prevent short-circuit.

1. Disconnect the battery cables from the battery and isolate the poles in order to prevent short-circuits.

Open the connection compartment by removing the fixing screws.

3. Disconnect any optional connectors.

4. Disconnect the DC connectors of PV panels strings.

5. Disconnect the AC GRID wires.

6. Disconnect the AC OUT wires.

7. Disconnect the GEN wires (optional).

8. Disconnect the battery cables from the DLS.

9. Disconnect the battery temperature sensor wires

10. Disconnect any external signal and control wires, if present

11. The DLS can now be removed to be disposed of or repaired

8.5 Disposal

When the DLS reaches the end of its useful life or is found to have irreparable faults:

• Dispose of the DLS in compliance with local legislation.

• Take the DLS to a recycling centre for electrical and electronic waste.

The DLS must be disposed of in compliance with local legislation.

Содержание DLS 300

































































Результаты поиска

Содержание DLS 300

Отзывы:

Похожие инструкции для DLS 300

Бренды по названию

Популярные бренды

Delios DLS 300, Инструкция по эксплуатации

Результаты поиска

Содержание DLS 300

Отзывы:

Похожие инструкции для DLS 300

Бренды по названию

Популярные бренды