Delios DLS 300, Инструкция по эксплуатации

Страница: 25 / 64

DLS 300 / 450 / 600
25
Code 240.010.0001
2.8 Residual Risks
Despite the cautions and the safety systems, some residual risks will still be present, which cannot be re-
moved.
These risks are listed in the following table, alongside a few recommendations to prevent them.
Residual Risks Table
RISK ASSESSMENT RECOMMENDED SOLUTION
Noise pollution caused by installations in unsuit-
able environments or where staff works on a reg-
ular basis.
Reassess the installation environment or site.
Unsuitable ventilation in the location, causing
equipment to overheat but sufficient to prevent
the discomfort of people who are on the site.
Restore adequate ambient conditions and venti-
late the site.
Protection from the elements such as water seep-
age, low temperatures, high humidity, etc..
Keep adequate ambient conditions for the equip -
ment.
Overheating of temperature surfaces (transform-
ers, batteries, coils, etc... ) can cause burns. In
addition, pay attention not to obstruct openings or
cooling systems on the equipment.
Use suitable PPE or wait for the equipment to
cool down before accessing it.
Lack of cleanliness: this affects the cooling sys-
tem and prevents the safety labels from being
read.
Adequately clean the equipment, the labels and
the workplace.
Storage of static energy can produce dangerous
electrical discharges.
Wait until these devices have discharged their
energy before carrying out any work.
Poorly trained staff. Request an additional training course.
During the installation stage, fixing the equipment
or its components with provisional means can be
hazardous
Take care and prevent access to the installation
area.
Accidentally disconnecting the quick connectors
whilst the equipment is operational or making in-
correct connections can produce electric arcs
Take care and prevent access to the installation
area.