Delios DLS 300, Инструкция по эксплуатации

Страница: 22 / 64

22
Code 240.010.0001
DLS 300 / 450 / 600
Improper or unauthorised use:
Although our equipment is manufactured to the highest standards, all electrical equipment can catch fire.
The DLS system must be installed indoors.
The optimal operation of the DLS system is ensured at a maximum ambient temperature of 40°C
(104°F).
The DLS system must be transported and stored in indoor locations with a temperature range of -30°C to
+70°C (-22°F to 158°F).
The DLS system must be used in locations with no acids, gases or other corrosive substances.
The DLS system must be used and stored in locations with relative humidity ranging from 5% to 95% with-
out condensation.
The DLS system must be transported in locations with a relative humidity ranging from 5% to 95%.
The DLS system must be used and stored in locations with atmospheric pressure ranging from 86kPa to
106kPa.
The DLS system must be transported in locations with atmospheric pressure ranging from 70kPa to
106kPa
The DLS system must be used at a maximum altitude above sea level of 3000m (9750 feet). For altitudes
higher than 2000m, because of the air being more rarefied, specific conditions may arise, which must be
taken into consideration when choosing the site of installation. All installations at altitudes higher than
2000m must be assessed case by case by taking into consideration the following critical issues:
• less efficient cooling:
• reduction of air electrical resistance and, when high voltages are present, the formation of electric
arcs:
• presence of cosmic radiations, which may affect the correct operation of electronic components.
2.2 Dismantling, Removal and Disposal
DELIOS s.r.l. DOES NOT accept responsibility for equipment disposal. The Customer must dispose of po-
tentially hazardous substances in compliance with regulations enforced in the country of installation and, in
any case, must avoid to cause any type of pollution.
The types of materials which make up the components of the equipment must be disposed of in suitable
rubbish tips.
Component disposal Construction materials
Frame, brackets, mountings Aluminium / Iron
Paint RAL
Electric cables Copper / Rubber
Electronic PCBs FR4 / Copper