DeLaRue MACH 12 Скачать руководство пользователя страница 15

Страница: 15 / 170

unpack

Installation

The internal packaging is designed not only for

protection during shipment but to allow an easy

means of removal from the shipping container.

1. Referring to FIGURE #2, remove the Inner

Liner and Top Pad. The Accessories

Package (located in the Coin Hopper) may

be removed at this time, if desired.

2. Referring to FIGURE #3, carefully roll the

Sorter forward until the Front Casters are

resting on the floor in front of the Pallet.

3. Raise the rear of the Sorter up slightly to

clear the Support Block, and continue to roll

the Sorter carefully forward to clear the Pal-

let. Lower the Sorter to the floor.

Shipping

Carton

Inner

Liner

Top

Pad

Pallet

THE SORTER WEIGHS APPROXI-

MATELY 200 POUNDS. FOLLOW THE

UNPACKING

INSTRUCTIONS

AVOID DAMAGE TO THE SORTER OR

PERSONAL INJURY.

FIGURE #2

PACKAGING

FIGURE #3

UNPACKING

Accessories

Package

SUPPORT HERE

PALLET

SUPPORT

BLOCK

SUPPORT

HERE

ROLL

FORWARD

FRONT CASTER

CHECK FOR SHIPPING

DAMAGE

The Sorter and all options were

thoroughly tested after they were

manufactured and carefully pack-

aged when they left the factory.

ANY DAMAGE THAT MAY HAVE

BEEN DONE IN SHIPMENT

SHOULD BE REPORTED TO

THE CARRIER IMMEDIATELY,

AND THE SHIPPING CAR-

TON(S) AND PACKAGING RE-

TAINED FOR INSPECTION, IF

NECESSARY.

CHECK FOR MISSING PARTS

Compare the items received

against the original order. Notify

your Sales / Service Representa-

tive of any discrepancies.

Содержание MACH 12











































































































































































Результаты поиска

Содержание MACH 12

Отзывы:

Бренды по названию

Популярные бренды

DeLaRue MACH 12, Руководство пользователя

Результаты поиска

Содержание MACH 12

Отзывы:

Бренды по названию

Популярные бренды