Del Medical EPEX Omniflex IV, Руководство по обслуживанию

Страница: 74 / 238

EPEX/Omniflex IV System Service Manual
3-26 Installing the System Hardware
Cable Connections
For the overall cabling connections for the EPEX/Omniflex IV System
components, refer to the wiring diagrams in Appendix E.
Cabling the Generator
To cable the Generator:
Connect the input power (nominally 480 VAC, 3-phase) to the input
terminal block in the generator. Refer to the generator service manual for
more specific instructions.
X-ray Tube Housing Ground
Refer to the generator service manual for specific instructions on
grounding the x-ray tube housing to the generator.
Failure to make this ground connection may result in intermittent operation
and/or exposure errors.
Wiring the Generator Cabinet Ground
To wire the cabinet ground:
Refer to the generator service manual for specific instructions on wiring
the cabinet ground.
Step Action
6 Route and connect the HV cables and grounds into the HV
transformer in the bottom cabinet, ensuring anode and
cathode are properly polarized with the X-ray tube.
Note: Cables should be started at the OTC and worked
backwards towards the Generator.
7 Connect Power Supply cable (PN 180-0507) from the OTC
to the Power Distribution PCB in lower section of
Generator cabinet.
L = brown
N = blue
Grn/Yel = Gnd
Refer to Appendix E for all system interconnections.