Del Medical EPEX Omniflex IV, Руководство по обслуживанию

Страница: 58 / 238

EPEX/Omniflex IV System Service Manual
3-10 Installing the System Hardware
To position the Generator:
Figure 3-4.
Generator on Skid with
Container Removed
Use caution if the straps are located at the back of the lower wiring channel.
Step Action
1 Remove the Generator from the shipping packaging by cutting the
bands that secure the cardboard sleeve to the shipping pallet.
2 Lift the shipping sleeve off the shipping pallet and put aside. The
generator should be the only thing attached to the shipping pallet.
3 Locate the Material Safety Data Sheet and the Configuration List.
Note: These will need to be copied. Place a copy in a sleeve in the
service manual and return the original to the Del Installation
Coordinator.
4 Check for shipping damage. Immediately contact the shipper if any
damage is detected.
5 Unscrew the bolts that secure the Generator to the shipping pallet.
Note: There are four bolts, one in each corner.
6 Use lifting straps to lift the Generator from the shipping pallet.
Note: Three to four people are required to accomplish this:three to
lift and one to pull away the crate bottom.
CAUTION