Del Medical EPEX Omniflex IV, Руководство по обслуживанию

Страница: 39 / 238

EPEX Omniflex IV System Service Manual
General Information 2-7
Figure 2-2.
Table Components
DirectRay Console Components
The DirectRay Console is used to enter patient information, initiate the
exposure process, preview captured images, and accept or reject captured
images. From here, the operator can select techniques through mouse
control; view, recall, and manage images stored in its database; or
distribute images, for example to a printer or archive.
The DirectRay Console components are:
• Image Preview Monitor—a CRT display that the operator uses to view
the EPEX/Omniflex IV System. The monitor is used to run software,
calibration, and diagnostics.
• Bar Code Reader—if the hospital preprocesses patient information and
prints it on a bar code, the operator can use the Bar Code Reader to
input this information to the system.
• Keyboard and Pointing Device—the operator uses the keyboard and
pointing device to control the EPEX/Omniflex IV System functions
through the software.
• Prep/Exposure Switch—used to signal the system to take the preview
exposure.
• X-ray Generator Power Switches—the upper switch turns the
Generator power on and the lower switch turns the Generator power
off.
Tower (encloses Bucky
counter weight)
Patient Support
Device
Bucky
Table Movement
Controls
Electro/
mechanical
components
PB20_116.CDR
Link Joint
Bucky
pivot point
Tower
pivot point
I/O interface
Horizontal track
Operator Control
Switches