Deitz PHARMAFILL TC4, Руководство по эксплуатации

Страница: 21 / 69

Rev 2022-03-08 Pharmafill Model TC4 User Manual
Deitz Company Inc. TC4 User Manual Page 10
6. GENERAL INFORMATION
6.1. STANDARD FEATURES AND CAPABILITIES
The model TC4 Pill Counter is a rotating-disc electronic counter. The TC4 will count most solid
oral dose products, including clear, translucent or center-hole. It is designed to be easy to operate
and maintain, and is ruggedly built to stand up to hard use and last for decades.
The electronics inside include two computers (one in the PLC and one in the Counting Sensor),
which are specially programmed to provide the most advanced features and performance.
The TC4 can be used for count verification, and manual or semi-automatic production filling.
❑
Check Counter – count the contents of a pre-filled and accurately
❑
Manual Production Filler – with the push of a button, fill one container with a pre-set
quantity.
❑
Semi-Automatic Production Filler – continuously fill one container after another,
with an operator providing empty bottles and taking away filled ones.
6.2. OPTIONAL FEATURES
The TC4 can be built to the customer requirements, with several options. Machines may be
upgraded in the field.
❑
Air Guide System – replaces the basic mechanical height guides with an adjustable
air jets, allowing easier setup from one product to the next, and virtually jam-free
product flow. Available with our AS1 Air Supply unit for clean, quiet low-pressure
air.
❑
Feeder With Chip Collection Chute – variable speed vibratory feeder with tray.
Includes sieves plates and a dust chute to collect dust and chips. The operator fills the
tray with a supply of product (up to 500 pieces), which is fed onto the glass disc at a
controlled rate. This saves the operator from manually feeding the product directly
onto the disc.
❑
Automatic Feeder Control – a special sensor assembly, which turns the feeder on only
when more product is need on the disc. This way the feeder will always provide the
correct amount of product, with over-feeding or starving the disc.
❑
Hopper – holds a large supply of product (up to 10,000 pieces) with adjustable
opening and visual sight indication of level. Product is fed into the vibratory feeder
tray. Ideal for semi-automatic production.