Deitz PHARMAFILL TC4, Руководство по эксплуатации

Страница: 59 / 69

Document TN 0101A Page 2
Model TC4 Operational Instructions for “No Bottle Sensors
Deitz Company Inc, Wall , NJ 732-681-0200
TN 0101A January 8, 2009 Page 2
3. Sensor Test
a. Place an object in front of the left bottle sensor. On the PLC, the red light marked X2
should turn on.
b. Place an object in front of the right bottle sensor. On the PLC, the red light marked
X3 should turn on.
4. Function Test
a. Using the front panel, set the Target Count to 10, set the Slowdown Count to 5. Press
RESET. Observe which side will be filling first (LEFT or RIGHT)
b. Set the disc speed to HIGH=50 and LOW=25.
c. Remove the clear chute cover and open the guides wide, so that you can use your
finger to make count signals.
d. Place bottles in the left and right filling positions. Observe that red lights X2 and X3
turn on.
e. Press AUTO. The disc should turn at the higher speed.
f. Remove the bottle from the filling side. The disc should stop, indicator light should
flash.
g. Replace the bottle. The disc should start turning again.
h. Remove the bottle from the non-filling side. The disc should not stop.
i. Use your finger to raise the count to the Slowdown count of 5. The disc should stop,
indicator light should flash.
j. Replace the bottle. The disc should start turning again at the slower speed.
k. Use your finger to raise the count to the target count of 10. The diverter flag should
switch sides.
l. Repeat the test from step “f.”, filling to the opposite side.
5. Functional Description
a. When using Slowdown Count (Slowdown Count is greater than zero and less than
Target Count) and Current Count = Slowdown Count and NEXT bottle is missing,
stop.
b. When NOT using Slowdown Count (Slowdown Count equals zero, or is equal to or
greater than Target Count) and Current Count = Target Count and FILLING bottle is
missing, reset and stop
c. Flash appropriate indicator light to show which side is causing error.