Deitz PHARMAFILL TC4, Руководство по эксплуатации

Страница: 55 / 69

Doc. No. TC4-AD1154_PM-Safety Deitz Company Inc Pharmafill TC4 Electronic Counter
February 21, 2008 Wall, NJ USA 07719 Page 1
Doc. No. TC4-AD1154_PM-Safety Deitz Company Inc Pharmafill TC4 Electronic Counter
February 21, 2008 Wall, NJ USA 07719 Page 1
Preventive maintenance
There is little preventative maintenance required on the machine other than routine cleaning and
inspection. There are no lubrication points. All bearing are sealed and/or permanently lubricated.
Every six months –
1. Remove the right side access panel.
2. Visually inspect the condition and tightness of the disc drive belt. If the belt appears
excessively loose, you may adjust it by loosening the motor assembly mounting screws and
moving the motor assembly back. Adjust it so there is no slack. Since it is a toothed belt,
there is no need for additional tension. If the belt is appears worn, replace it.
3. Visually inspect the condition of the flag linkage. If the hole in the linkage appears
excessively worn, replace it. The shape of the hole should be a perfect obround (oval).
Rounding of the hole indicates wear.
Safety device
There are no hazardous aspects to the routine operation of the machine. There are no dangerous
moving parts or sharp edges. Therefore there are no guards or interlocks to prevent operation.
For quick, convenient stoppage of the machine operation, there is a twist-to-unlock emergency stop
button.
For safe internal inspection and service, there is a main power disconnect switch in the power entry
module (along with main fuse).