Description
Notes
CBE activated
The tie breaker is allowed to close before the genset is excited. This is typically used for
asynchronous gensets.
CBE deactivated
The tie breaker is not allowed to close before the genset is excited.
CBE test relay(s) activated
4.5
Redundancy events
More information
See the document
Description of options: Option T1 Critical power
for information about Redundancy events.
4.6
Maintenance box
These events are for the remote maintenance box (RMB). They are only available for genset controllers.
More information
See
Option T4 Remote maintenance box with multiple gensets
for more information.
4.7
Command timers
Description
Notes
Cmd timer [01-04] active
The command timers (1 to 4) will operate in pairs to activate and deactivate a flop flop
function.
Any Cmd timers active
Any command timers will operate in pairs to activate and deactivate a flop flop function.
4.8
CAN inputs
More information
See
Option G5 Power management
for information about CAN Inputs.
4.9
Display
Description
Notes
Display [1-3] primary
When more displays are used, set the display [1-3] as the primary.
4.10 PM compatibility
More information
See
Option G5 Power management
for information.
4.11 Static synchronisation type
These events are only available in genset controllers.
Description
Notes
GB: Breaker
Static sync. of the GB is set to Breaker Sync.
GB: Infinite
Static sync. of the GB is set to Infinite Sync.
Application note 4189341276B EN
Page 26 of 50
