4. List of events
4.1
Alarms
4.1.1
Alarms
Description
Notes
The alarms are available as events in
the alarm category.
The alarm lists have an event for each alarm, including the alarms that are not available in
the present configuration of the controller and options.
4.1.2
CIO alarms
Only available if the CIO modules are enabled.
Description
Notes
CIO 116 No. 1 In. 10
to CIO 116 No. 3 In. 26
There is one alarm per input.
CIO 308 No. 1 In. 8.1
to CIO 308 No. 3 In. 29.2
There are two alarms per input.
CIO 308 No. 1 In. 8 wire fail
to CIO 308 No. 3 In. 29 wire fail
The M-Logic event is active when the alarm is active. Wire break detection must be
activated before this event can become active.
CIO 116 No. 1 module missing
to CIO 308 No. 3 module missing
One or more CIO modules are missing.
4.2
Limits
4.2.1
Limits
Description
Notes
The limits for alarm outputs are
available as events in the limits
category.
The limits list includes the limits, including the limits that are not available in the present
configuration of the controller and options. If the outputs A and B of an alarm (for example,
BB < 1) are set to
Limits
and the alarm conditions are met, then the alarm is not activated,
but the alarm still activates the limit in M-Logic.
4.2.2
CIO limits
Only available if the CIO modules are enabled.
Description
Notes
CIO 116 No. 1 In. 10
to CIO 116 No. 3 In. 26
The limit is activated at the same time as the associated alarm. However, the alarm can be
hidden by setting output A and output B to
Limits
. In this case the alarm will never be
activated, but the limit will be activated when the alarm conditions are met.
CIO 308 No. 1 In. 8.1
to CIO 308 No. 3 In. 29.2
CIO 308 No. 1 In. 8 wire fail
to CIO 308 No. 3 In. 29 wire fail
Application note 4189341276B EN
Page 16 of 50
