DeDietrich Kaliko TWH 200E Скачать руководство пользователя страница 14

Страница: 14 / 76

Precautions to be taken:

No smoking

Prevent the accumulation of electrostatic charges

Work in a well ventilated place.

1.4.8.

Personal protection

Respiratory protection:

If insufficient ventilation: AX type cartridge mask

In confined spaces: Full facepiece self-contained

breathing apparatus.

Hand protection: Protective gloves in leather or nitrile

rubber.

Eye protection: Safety glasses with side protection.

Skin protection: Clothing made mostly of cotton.

Industrial hygiene: Do not drink, eat or smoke at the

place of work.

1.4.9.

Considerations on disposal

Product waste: Consult the manufacturer or the

supplier for information on recovery or recycling.

Soiled packaging: Reuse or recycle after

decontamination. Destroy in authorised installations.

WARNING

Disposal must be done in compliance with

prevailing local and national regulations.

1.4.10.

Regulations

EC Regulation 842/2006: Fluorinated greenhouse

gases under the Kyoto Protocol.

1. Safety instructions and recommendations

TWH 200E TWH 300E TWH 300EH

19/01/2015 - 300026515-001-05

Содержание Kaliko TWH 200E













































































Результаты поиска

Содержание Kaliko TWH 200E

Отзывы:

Похожие инструкции для Kaliko TWH 200E

Бренды по названию

Популярные бренды

DeDietrich Kaliko TWH 200E, Инструкция по установке и обслуживанию

Результаты поиска

Содержание Kaliko TWH 200E

Отзывы:

Похожие инструкции для Kaliko TWH 200E

Бренды по названию

Популярные бренды