DeDietrich Kaliko TWH 200E Скачать руководство пользователя страница 10

Страница: 10 / 76

1.1.5.

Miscellaneous

DANGER

If smoke is released or in case of refrigerant leak:
1. Do not use a naked flame, do not smoke, do

not operate electrical contacts or switches

( doorbell, light, motor, lift, etc..).

2. Open the windows.
3. Switch the appliance off.
4. Avoid contact with the refrigerant. Danger of

frost injuries.

5. Trace possible leaks and seal them

immediately.

WARNING

Depending on the settings of the appliance:

Do not touch the refrigeration connection

pipes with your bare hands while the

appliance is running. Risk of being burnt.

CAUTION

Do not neglect to service the appliance.

In order to limit the risk of being scalded, the

installation of a thermostatic mixing valve on

the domestic hot water flow piping is

compulsory.

1.2

Recommendations

WARNING

Only certified professionals having received

adequate training are permitted to work on the

appliance and the installation.

WARNING

Before any work, switch off the mains supply to

the appliance.

1. Safety instructions and recommendations

TWH 200E TWH 300E TWH 300EH

19/01/2015 - 300026515-001-05

Содержание Kaliko TWH 200E













































































Результаты поиска

Содержание Kaliko TWH 200E

Отзывы:

Похожие инструкции для Kaliko TWH 200E

Бренды по названию

Популярные бренды

DeDietrich Kaliko TWH 200E, Инструкция по установке и обслуживанию

Результаты поиска

Содержание Kaliko TWH 200E

Отзывы:

Похожие инструкции для Kaliko TWH 200E

Бренды по названию

Популярные бренды