DeDietrich KALIKO TWH 200 E Скачать руководство пользователя страница 43

Страница: 43 / 72

Accessing the menu

Description

Installer parameters

For more information, see

Displaying the measured values, page 44

Measurements menu, page 44

Counters, page 45

Displaying the counters, page 45

Resetting the counters to zero, page 46

Log of messages and faults, page 59

Error display Err, page 60

Displaying lockouts bL, page 60

Resetting the lockout and error memory to zero, page 60

Modifying the installer parameters, page 47

Accessing the parameters, page 47

List of parameters, page 47

Control system sequence, page 49

Restoring the factory settings, page 50

6.2

Points to check before commissioning

1. Check that the thermodynamic water heater is full of water.

2. Check the tightness of the connections.

3. Check that the safety devices are working correctly.

4. Check the operating mode.

6.3

Commissioning the appliance

Caution

Initial commissioning must be performed by a qualified professio

nal.

Caution

After positioning the appliance, wait one hour before starting it up.

Carry out the commissioning operations in the following order:

1. Connect to the mains.

2. Check that no error codes or messages are shown on the display.

The domestic hot water temperature set point is factory-set to

55 °C in comfort mode.

3. Select the BOOST ( ) operating mode.

If domestic hot water production is required, the compressor starts

up after 120 seconds.

For more information, see

Selecting the operating mode, page 43

6.4

Checks and settings after commissioning

1. Check the tightness of the connections.

2. Check the temperature on the two domestic hot water temperature

sensors to ensure that the appliance is working correctly.

If the readout values are incorrect, check the positioning of the

sensors in the sensor tube.

3. A few days after commissioning of the appliance, carry out a visual

inspection to check for any leaks in the water system or any block

ages in the condensates run-off.

6.5

Selecting the operating mode

The operating mode is indicated on the main display.

6 Commissioning

300026515 - v09 - 25072017

Содержание KALIKO TWH 200 E









































































Результаты поиска

Содержание KALIKO TWH 200 E

Отзывы:

Похожие инструкции для KALIKO TWH 200 E

Бренды по названию

Популярные бренды

DeDietrich KALIKO TWH 200 E, Руководство по установке

Результаты поиска

Содержание KALIKO TWH 200 E

Отзывы:

Похожие инструкции для KALIKO TWH 200 E

Бренды по названию

Популярные бренды