DeDietrich KALIKO TWH 200 E, Руководство по установке

Страница: 14 / 72

Model Unit TWH 200 E TWH 300 E TWH 300 EH
Power supply voltage V 230 230 230
Circuit breaker A 16 16 16
Ambient air performance
Load profile - L XL XL
Absorbed electrical power
(heat pump)
W 460 470 470
COP
(2)
2.73 2.93 2.68
COP
(3)
3.34 3.50 3.27
Vmax
(4)
litres 274 377 383
Pes
(2)(5)
W 39 44 48
Outside air performance
Load profile - L XL XL
Absorbed electrical power
(heat pump)
W 500 500 500
COP
(2)
3.16 3.11 2.9
Nominal air flow rate (∆P = 25
Pa)
m
3
/h
320 320 320
Vmax
(4)
litres 275 378 383
Pes
(5)(2)
W 27 27 32
Maximum length of the
160 mm diameter air connec­
tion.
(6)
m 26 26 26
Hydraulic back-up
Exchanger surface
m
2
- - 1.00
Continuous flow when ∆T =
35 K
(7)(8)
litres/h - - 955.6
Flow rate over 10 minutes
when ∆T = 30 K
(7)
l/10 min - - 420
(1) Quantity of refrigerant calculated in tonnes of CO
2
equivalent.
(2) Value obtained with an air temperature of 7 °C and a water inlet temperature of 10 °C according to EN16147, based on LCIE Specifica­
tions No. 103-15/B:2011
(3) Value obtained with an air temperature of 15 °C and a water inlet temperature of 10 °C according to EN16147, based on LCIE Specifi­
cations No. 103-15/B:2011
(4) Maximum usable volume of hot water at a temperature of 40 °C
(5) Absorbed power at stabilised rate
(6) The installation of the heat pump intake and backflow ducts adversely affects its performance
(7) Domestic cold water inlet at 10 °C - Primary inlet temperature at 80 °C
(8) Output: 34.1 kW
3 Technical specifications
14 300026515 - v09 - 25072017