98
MUDANÇA DE GÁS
Atenção
O seu aparelho vem regulado de
fábrica para o gás natural.
Os injectores necessários para a adaptação
aos gases butano/propano encontram-se na
bolsa que contém este guia.
Conselho
Em França, esta placa também pode
ser adaptada ao ar propanado/butanado. A
saqueta de adaptação é fornecida mediante
pedido pelo seu Serviço Pós-Venda.
Em cada mudança de gás, deverá
sucessivamente:
—
Adaptar a ligação do gás
—
Mudar os injectores
—
Regular os redutores das válvulas.
•
Adaptar a ligação do gás
: consulte o
parágrafo
“Ligação de gás”.
•
Mude os injectores
da seguinte forma:
—
Retire as grelhas, as tampas e as cabeças
de todos os bicos.
—
Com a chave fornecida, desaperte os
injectores situados no fundo de cada vaso e
depois retire-os
(Imagem 01).
—
Instale os injectores do gás correspondente
no lugar, de acordo com as indicações dos
injectores e com a tabela de características
dos gases apresentada no final do capítulo.
Para isso:
—
Aperte-os à mão até que o injector fique
bloqueado.
—
Aperte bem o injector com a chave.
—
Com um lápis, faça uma linha na placa do
forno no local indicado
(Imagem 02).
—
Rode a chave no sentido dos ponteiros do
relógio até que a linha apareça do outro lado
(Imagem 03).
Atenção!
Não ultrapasse esta linha, pois pode
danificar o produto.
-
Volte a colocar as grelhas de suporte dos
acessórios, as tampas e as cabeças dos
bicos.
•
Conselho
Cada vez que mudar de gás, marque a
casa que corresponde ao novo tipo de gás
na etiqueta existente na bolsa.
Consulte o parágrafo correspondente em
“Ligação do gás”.
Imagem 02
Imagem 03
Linha
Linha
Chave
Chave
Imagem 01
Chave
Injector
Vaso
PT
2
2 // INSTALAÇÃO DO SEU APARELHO