49
SETTING THE TIMER
A timer is available for all the cooking zones
but can only be used for one at a time.
With a series of presses of the
touch
control you can select the cooking zone to
which you want the timer to apply.
The timer can only be used for a plate that is
already in use.
•
To use the timer
:
—
Switch on the cooking zone and adjust
the power level.
—
Position the rotating symbol on this
cooking zone.
—
Adjust the time by pressing
or
. A
dot will light up on the display to confirm your
operation.
The timer starts counting only if the cooking
zone is covered with an item of cookware.
When cooking is finished the zone switches
off, the timer indicates
0
, and you are notified
by a
beeping
sound.
—
Press
or
touch control of the timer
to stop the beep.
•
To change the timer settings
:
—
Press the
or
timer touch controls.
•
To stop the timer
:
—
Press the
touch control.
•
To change the cooking plate to which the
timer is applied
:
—
Stop the current timer.
—
By pressing the
touch control
successively, assign a new operating cooking
zone.
THE CONTROLS
POWERING ON
Press the
touch control for the zone you
want to use.
A flashing
0
display and a beep indicates that
the zone is on. You can now set the power
you require.
If you do not select a power level, the cooking
zone will automatically switch off.
OFF
Press the
touch control for the zone used
or power
touch control until
0
is displayed.
ADJUSTING THE POWER LEVEL
Press
or
touch control to adjust your
power level between 1 and
(maximum
power =
).
When the appliance is switched on, you can
move directly to maximum power by pressing
touch control .
Tip
When using one cooking zone at
maximum power, the other cooking zone
will be automatically limited, as shown on
the display.
•
A
B
On/off touch controls
Power level touch controls
Timer touch controls
C
A
B
C
•
•
•
•
EN
3
3 // USING YOUR APPLIANCE