53
Note
- Never clean your appliance while it is in use. Set all the electric and gas controls to
zero.
If a crack appears in the surface of the glass, disconnect your appliance from the power
supply to avoid electric shock. Contact the After-Sales Service department.
Tips
— We recommend cleaning the hob fittings by hand rather than in a dishwasher.
— Do not use an abrasive sponge to clean your hob.
— Do not use a steam cleaner.
MAINTAINING YOUR APPLIANCE
•
EN
4
4 // DAILY CARE OF YOUR APPLIANCE
MAINTENANCE......
WHAT TO DO
PRODUCTS/ACCESSORIES
TO USE
The spark igniters
and injectors
In the event that the spark plugs become
soiled, clean them using a small, hard-
bristled brush (non-metallic).
The gas injector is located in the depression
in the centre of the burner. Be sure not to
block the injector during cleaning, as this
will affect hob performance. Use a safety pin
to unblock the injector if necessary.
. Small, hard-bristled brush.
. Safety pin.
The pan supports
and gas burners
For tough stains, use a non-abrasive cream,
then rinse with clean water. Carefully wipe
each part of the burner before using your
hob again.
. Gentle scouring cream.
. Kitchen sponge.
Induction zones
- Clean with warm water and then wipe. If
necessary finish with the scouring side of a
sponge then wipe.
- For tough stains, use products designed
for vitroceramic glass (example opposite).
. Kitchen sponge.
. Special vitroceramic glass
products (e.g. Cera-clean).
The glass top
- Clean with warm water and then wipe. For
tough stains, use special vitroceramic glass
cleaning products.
. Kitchen sponge.
. Special vitroceramic glass
products (e.g. Cera-clean).
