Connect Remote (CR)
AT YOUR COMMAND >> CR
Connect to remote AVA...
CONNECTED to remote AVA
-----------------------
Analog Voice Adapter (AVA) Vx.y
REMOTE COMMAND [EXIT to disconnect] >>
While this connection is active, the normal
AT YOUR COMMAND >>
prompt is replaced with the
REMOTE COMMAND >>
prompt. Most AVA-E commands can be entered and are transmitted to the
remote AVA-E. This allows configuration and testing of the remote unit.
The following commands are not allowed in remote mode and, therefore, are not displayed on the remote
Help menu: CR, CN, RTD and !R.
If the EXIT command is not issued, the connection will time out in 30 seconds and return to the local
AT
YOUR COMMAND >>
prompt.
REMOTE COMMAND [EXIT to disconnect] >> EXIT
Disconnect remote AVA...
Remote AVA DISCONNECTED
AT YOUR COMMAND >>
Time (TI)
This command displays the AVA-E up time. That is, the elapsed time since the unit was last reset.
Repeat Last Command (*)
To repeat the last command, simply press the
*
key. This is handy for repeating screens of constantly
changing data.
Test Tools (TT)
Test Tools
---------------------------
Monitor Data Port:
RX/TX.............MR/MT
RX/TX in HEX......MRH/MTH
Show RS232..........SR
20
