dbx DriveRack 240 Скачать руководство пользователя страница 58

Страница: 58 / 69

Hardware

Note

Make sure that all outputs are muted on the DriveRack™ prior to adding power to any
devices in the signal path (pre and post DriveRack™).

Connect the outputs from the mixer to the inputs of the DriveRack™.

Connect the outputs of the DriveRack™ and run to the selected speaker amplifier.

Making sure that all outputs are muted, apply power to the mixer and amplifiers.

Make connections from switch closure output on the 240/241 to the wall-mount control
switches (optional).

Software

Select a program that uses a 1X4 (with filters) crossover configuration.

Store three separate copies of this preset, with names such as Zone 1-4.

Adust the EQ, Time alignment delay, and limiter for each preset Zone.

Note: Speakers near the stage can be EQ’d differently to eliminate feedback. Speakers locat-
ed in the Hall can use a flatter EQ with a time delay.

7.7 - Single Room Multi-Zone

Zone

Application Guide

Section 7

DriveRack

™

DriveRack™ User Manual

Содержание DriveRack 240






































































Результаты поиска

Содержание DriveRack 240

Отзывы:

Похожие инструкции для DriveRack 240

Бренды по названию

Популярные бренды

dbx DriveRack 240, Руководство пользователя

Результаты поиска

Содержание DriveRack 240

Отзывы:

Похожие инструкции для DriveRack 240

Бренды по названию

Популярные бренды