dbx DriveRack 240, Руководство пользователя

Страница: 45 / 69

®
Utilities
Section 5
DriveRack
™
35
®
DriveRack™ User Manual
To access and edit the Load Stored option of the unit, use the following procedure.
• From Program mode, press the
UTILITY
button and use the
PREV PG
and
NEXT PG button to move to the page that appears as follows:
• Rotate the
DATA
wheel to select either On or Off..
The Switch closure function is a feature available in the 240/241 DriveRack units. This feature
allows control of key functions, such as muting and program changes from a wall mounted
switch. The following information and application provides you with all of the information nec-
essary to utilize this powerful tool.
Note: Switch closure options can only be edited when security clearance is high.
Additionally, switch closure setups on the 241 can only be performed through the
DriveWare software.
To setup the switch closure option from within the 240, the procedure is as follows:
• From Program mode, press the UTILITY button and use the PREV PG and
NEXT PG button to move to the page that appears as follows:
• Note that the underscore indicates the currently selected parameter for
editing. To select parameters to edit from the current page, simply press
the
DATA wheel until the underscore is under the parameter that you
wish to edit.
• Once the parameter to edit has been selected, rotate the DATA wheel to
edit parameter values.
• If Switch closure is currently selected, you have the option of selecting clo-
sures 1-4 to assign functionality by simply rotating the
DATA
wheel.
• Once a switch port has been selected (1-4), you will assign the type of switch
(momentary or latching) to be wired to a designated port. A latch type
switch is similar to a light switch with two positions (on/off). A momentary
switch typically is a push button switch which sends a closed or on signal
only when it is being pressed.
Switch Closure 1
Moment Ignore
5.8 Switch closure option
Load Stored On