dbx DriveRack 240, Руководство пользователя

Страница: 13 / 69

®
Function Buttons
The function buttons of the 240 DriveRack™ allow direct access to all editing and navigating
functions of the 240 DriveRack™.
Input Meters
The 240 DriveRack™ provides the user with two independent six segment Lightpipe™ input
meters that range from -30 to +22 dBu.
Note : These meters are calibrated for the +22dBu set-
ting of the internal gain jumpers. These meters monitor the signal level right after the input
mixer module.
Threshold Meters
The threshold meters indicate that the threshold level has been exceeded within the dynamics
section (compressor/limiter), and gain reduction may be taking place within the specific output
channel.
Output Meters
The 240 DriveRack™ provides the user with four independent six-segment Lightpipe™ output
meters that range from -30 to +22 dBu.
Note : These meters are calibrated for the +22dBu set-
ting of the gain jumpers.
Output Mutes
The four output mute buttons are used for independently muting each output of the 240
DriveRack™.
Power Switch
Turns the 240 DriveRack™ on and off. Note : dbx Professional Products recommends that
power amplifiers connected to the DriveRack™, should be powered down prior to cycling the
power on the DriveRack™.
IEC Power Cord Receptacle
The 240 comes with an universal power supply that will accept voltages ranging from 100V-
240V at frequencies from 50Hz-60Hz. An IEC cord is included.
Switch Closure Connection
This Euroblock-type connector is used to interface the 240 with wall-mount zone control sys-
tem switches. For more information regarding the switch closure connection and its applica-
tions, please see the Utilities sections.
PC Connection
This DB-9 type connection is used to send and receive information to and from the computer
running the DriveWare™ software.
1.3 Rear Panel Connections (241)
Getting Started
Section 1
DriveRack
™
DriveRack™ User Manual
3