CBT36K Assembly Manual
Page
37
of 89
7.2.1.5. Final view of Mid-Bass Bank 1 Drivers with all Connections Secured:
This is what Bank 1 should look like with all six ND91 mid-bass drivers connected. Compare your work
with this photo.
7.2.2. Bank 2 Wiring Diagram:
17” Black
to Bank 3-
7
8
9
10
6” Gray
24” Black
17”Red
6” Gray
6” Gray
Bank 2 Wiring Diagram
Bank 2 input
4” Red
27” Red
to Bank 5+
1.5 //1.5 ohm
Note: 1.5//1.5 is notation for
two resistors in parallel. The
actual value of the combination
is 0.75 ohms.
Use 18AWG wire for all BASS-MID wiring.
Fig. 10. Bank 2 wiring diagram for mid-bass drivers 7 to 10.
7.2.2.1. Final view of Mid-Bass Bank 2 Drivers with all Connections Secured:
Compare your work against this photo after wiring Bank 2.
