107
Une fois l'emplacement approprié choisi, percer un trou d'un diamètre de 32 mm dans le tuyau.
Once a suitable location is selected, drill a 32mm diameter hole in the pipe.
Place the O-ring in the groove on the inside face of the top half of the pipe clamp.
Place the top half of the pipe clamp onto the pipe ensuring that the hole in the pipe clamp is aligned with the hole in
the pipe.
Placer le joint torique dans la rainure sur la face intérieure de la moitié supérieure de la bride de tuyau.
Once a suitable location is selected, drill a 32mm diameter hole in the pipe.
Place the O-ring in the groove on the inside face of the top half of the pipe clamp.
Place the top half of the pipe clamp onto the pipe ensuring that the hole in the pipe clamp is aligned with the hole in
the pipe.
L’interrupteur de débit ne doit pas être positionné sur la face inférieure des tuyaux horizontaux.
Once a suitable location is selected, drill a 32mm diameter hole in the pipe.
Place the O-ring in the groove on the inside face of the top half of the pipe clamp.
Place the top half of the pipe clamp onto the pipe ensuring that the hole in the pipe clamp is aligned with the hole in
the pipe.
