7
DIMENSIONS (mm)
MODEL
DHP90
DHP130
DHP170
DHP210
DHP280
DHP3503
DHP90
890
1060
1314
DHP130
430
512
DHP170
657
957
DHP210
53
57
66
72
91
135
* Above data is subject to modification without notice.
NOTE:
The picture above is the specification diagram of the pool heat pump, for technician’s installation and
layout reference only. The product is subject to adjustment periodically for improvement without further notice.
4. INSTALLATION GUIDANCE
4.1 Installation reminder
The installation of this product should be carried out by a person knowledgeable in swimming pool plumbing
requirements following the installation instructions provided in this manual.
To get the best results from your Davey heat pump, its location is critical. The Davey heat pump takes hot air
from its surroundings and transfers this heat through its heat exchanger, to the pool water.
Your Davey heat pump should be installed in a well ventilated area.
WARNING: Improper installation, adjustment, service, maintenance or use can cause fire,
electrical shock or other conditions which may cause injury or property damage. Consult
a qualified technician or service agency for information or assistance. All service calls
under warranty should be authorized by Davey Water Products.
The installation of any pipework should be kept to a minimum
Pipe work should be protected from physical damage and shall not be installed in an
unventilated place.
The heat pump should not be installed indoor.
Any mechanical connections need to be kept accessible for maintenance purposes.
The heat pump requires 50cm clear space on each side to be clear from obstructions for
ventilation purposes.
The heat pump draws air in through each side of the heat pump and out through the rear.
Please consider this during installation.
For installations up to 17kW
