background image

4

e. Set proper temperature in order to get a comfortable water temperature to avoid overheating or 

overcooling.

f.  In order to optimize the heating effect, please install heat preservation insulation on pipes between 

swimming pool and the heat pump, and please use a recommended cover on the swimming pool.

g. Connecting pipes of the swimming pool and the heat pump should be ≤10m.
h. Except for the methods recommended by the manufacturer, do not use any methods to accelerate the 

defrosting process or clean the frosted parts.

i. If a repair is required, please contact the nearest after-sales service centre. The repair process must be 

strictly in accordance with manual. All repair practice by non-licensed personnel is prohibited.

j. Don’t use or stock combustible gas or liquid such as thinners, paint and fuel to avoid fire.

2.3 Safety

a. Please keep the main power supply switch far away from children.
b. When a power outage happens during operation, the heat pump will start when the power is restored..
c. Please switch off the main power supply in lightening and storm weather to prevent from damage caused 

by lightning.

d. Safety inspection must be carried before the maintenance or repair of heat pumps with R32 gas in order to 

minimize the risk.

e. Installation and any repairing should be conducted in an area with adequate ventilation and with no nearby 

ignition sources.

f.  If R32 gas leaks during the installation process, all operations must be stopped immediately and call the 

service centre.

WARNING: Do not use means to accelerate the defrosting process or to clean other than 

those recommended by the manufacturer.
The appliance shall not be stored near any ignition sources (for example; open flames, 

an operating gas appliance or an operating electric heater.
Do not pierce or burn.
Be aware that refrigerants may not contain an odour.

3. ABOUT YOUR HEAT PUMP

3.1 Transportation

a. Always keep upright

b. Do not lift the water union

  (Otherwisethe titanium heat exchangermay be damaged)

3.2 Accessories

Water Union

Drainage Kit

Содержание DHP90





























Отзывы: