Daum electronic ergo_run classic, Руководство пользователя

Страница: 9 / 38

9
D
ergo_run
www.
ergo-run.com
On / Off switch
On / Off switch
Switching On / Off
Please read the safety notes before switching the treadmill ergometer on.
Use the green On/Off switch „ O / I „ on the front motor cover lower of the
device to switch it on and off. The switch is illuminated in the ON position
Upon switching the device on a “d” appears on the display screen and a welcome
melody sounds. Wait for the beep signal to start using the dashboard.
For safety reasons the
power cord must be dri-
ven away to the front,
otherwise it risks being
damaged by the height
adjusting mechanism.
!
EMERGENCY STOP switch
The Emergency Stop switch must be unlocked before you can use the ergo_
run classic. To unlock it turn the red button to the left/right slightly.
Fig - Press the red button in hazard situations
EMERGENCY STOP Safety Rope
The ergo_run classic is equipped with an Emergency Stop Safety Rope. This
rope guarantees that when the user/patient is about to fall, or when the user/
patient runs too slowly, the running belt will stop automatically.
The patient/user must therefore attach himself or herself to the safety rope be-
fore starting a training session (Fig. 1). The length of the safety rope must be
adjusted in such a way that the Emergency Stop Function is surely executed
when
- the user is about to fall.
- before the user reaches the rear third section of the running belt.
When the Emergency Stop Safety Rope is pulled out, the running belt will resu-
me its operation when the Start key is pressed (dashboard console) after the
safety rope is reinstalled on the dashboard (Fig. 2)
.
Fig.1
Fig.2
The last program last used is now
selected after start-up is complete
The first time the device is turned on
The manual speed program is selected.
Setting the inclination of the dashboard
Slightly loosen the toggle screw ( A ) and adjust the inclination of the
dashboard.
A
Using the device
GB