Daum electronic ergo_run classic, Руководство пользователя

Страница: 8 / 38

8
Warning:
Do not squeeze
the cable when
assembling the lower
cover plate.
Folding / unfolding
The treadmill is shipped folded to save place. Three gas pressure springs
support the folding mechanism for ease of use and safety. This makes unfol-
ding and folding much easier.
Folding up:
- Set the inclination angle to 0°.
-
Unplug the power cord!!!
- Fold up the treadmill from the rear until the locking lever audibly engages.
The treadmill is now locked and can be transported and moved.
Unfolding:
- Stand behind the treadmill and hold the running surface with both hands
- Press the release pedal
(this releases the locked folding mechanism)
- Slowly unfold the ergo_run (hold the running surface while unfolding).
The treadmill is unlocked.
Disassembling the handrails
If the device happens to be too bulky upon delivery (for instance if it would not
pass through a door), it is possible to disassemble the handrails.
Watch the cables and the cable connectors!
Disassembling the handrails:
- remove the 5 screws ( A and B) on the left and right handrails
(Fig.1). 3 screws (A) top and 2 screws (B) bottom.
- you only need to remove the screws on one side (left or right) to
disassemble the central handrail.
4 screws C on the bottom side of the cover plate
1 screw D on the connection to the central handrail
- be careful not to damage the cable connections in the columns when lifting
the handrails. Release carefully the connections (fig. 3)
- when reassembling be careful not to squeeze or damage any cable.
Level adjustment (foot level compensation)
Set the height adjustable feet to ensure a stable, safe stand to the tread-
mill. Only the rear feet are mounted in the factory (makes moving the device
easier).
If the treadmill stand is not stable once it is unfolded and installed, then both
front stand feet F must be mounted (screwed in).
Removing the front feet makes moving the device easier.
Assembling, disassembling the stand feet
Please ask a second person to help you:
- lightly tilt the device to one side
- screw the stand foot in or out (from underneath)
- repeat on the other side
Disassembling the front columns with the dashboard
It is possible to disassemble the front columns with the dashboard after the
handrails have been removed. This makes transporting the device easier.
Watch the cables and the cable connectors!
Disassembling the front columns:
- remove the 3 screws
E
, on the left and right front column (bottom)
- when lifting the front column be careful not to damage the 2 connectors (right
column in the running direction)
- when reassembling be careful not to squeeze or damage any cable.
Fig.1
A
B
D
A
A
D
C
C
C
C
Fig.2
A
release pedal
Fig.3 Fig.4
E
F
Using the device