33
D
ergo_memo-card1
Slider
switch
ergo_memo-card1
When this card is inserted in the dashboard, detailed training data are
automatically saved on the ergo_memo-card1. Individual training instructions
and personal data of the user can be written on the memory card. This data
are then automatically read by the dashboard making unnecessary to set the
dashboard manually.
The slider of the ergo_memo-card1 must point downward when the card is
inserted in the computer. This enables writing to the card. Slider pointing
upward: the card is locked/write protected. The training device ignores the
slider position.
The maximum usable card size is 1GByte.
In principle the card should only be removed when no training is being
executed!
What to consider when manipulating memory cards?
1. Electrostatic charges can damage electronic parts. Therefore you should
discharge any static electricity charges from your body before touching
the memory card by first touching a grounded metal object (e.g. heating
pipes, water pipes).
2. Avoid touching the contact pins of the memory card.
3. Memory cards must not be exposed to heat, direct sunlight, or humidity.
4. Memory cards may not be bend, twisted, or dropped.
5. NEVER remove a memory card from a used device during data transmis-
sion, and NEVER pull a memory card when data are being written to the
card, e.g. during a training session to avoid data loss and/or damages to
the memory card.
6. Regularly make a backup copy of the contents of the memory card to your
computer.
Multifunction serial USB Bluetooth adapter
The serial USB Bluetooth adapter was designed specially to establish a
wireless connection of Daum training ergometers to a computer; it complies
with the Bluetooth 2.0 Standard. It can also be used as a USB or serial
adapter between the training device and the computer.
Range approx. 10 m (depending on architectural environment)
Order No.: 9091024
USB Bluetooth-Adapter
Floor protection mat
Size: 200 cm x 100 cm
Colour: transparent
Order No.: 0810402
You will find more details on our home page:
www.daum-electronic.de
Cardio Sensor Chest Belt
The chest belt contains a wireless transmitter that transmits the heart rate to
the Cardio pulse rate receiver in the device.
What is in the box of a Cardio Sensor chest belt (non coded):
1 Skin-friendly Cardio Sensor chest belt with integrated pulse sensor and
transmitter
1 Adjustable elastic belt to attach it to your chest
Order No. 90 91 015
Cardio sensor chest belt
Underside of the Cardio sensor chest belt
The button type battery should be replaced when you note a loss of battery
power. Simply remove the battery cover on the underside of the transmitter
with a coin and replace the battery with an equivalent new one.
Note: Your pulse rate will be cor-
rectly evaluated over the whole
measuring range only if you use
a non-coded wireless pulse rate
transmitter.
Cardio sensor chest
belt correctly put on
Accessories (sold separately)
GB
Содержание ergo_run classic
Страница 1: ...User Manual ergo run classic ...
