General Service Guide
71
Document No. 896 623
Memory Board, B-CMMEM/ Memory Module, M-MEM
72.
Enter the
MemCards
service menu:
Monitor Setup
-
Install/Service
(password 16-4-34)
-
Service
(password 26-23-8)
- Frame - MemCards
Check that the module is recognized properly, i.e. ‘Present’ and ‘Active’ state
YES
.
?
73.
Check that the Memory board memories and the PCMCIA controller have passed the tests.
The status for each should be
OK
.
?
74.
Select
Communication
.
Check that ‘Interface status’ states
Active
continuously and the error counter values on the
bottom part of the menu are stable.
?
75.
Select
Status
.
Insert the Memory card labeled ‘Menu’ in the left-hand side memory card slot. Check that the
message ‘Menu Card inserted’ appears onto the message field and the white menu card
symbol on the upper right hand corner of the screen appears within 1 minute.
Wait until the information regarding SLOT1 is fully updated in the service menu then check
that the ‘Card type’ states
MENU
and the ‘File system’ ATA.
Check that the rest of the information for SLOT1 is reliable and no errors have been
detected.
?
76.
Insert the Memory card labeled ‘Data’ in the right-hand side memory card slot. Check that
the message ‘Data Card inserted’ appears onto the message field and the green menu card
symbol on the upper right-hand corner of the screen appears within 1 minute.
Wait until the information regarding SLOT2 is fully updated in the service menu then check
that the ‘Card type’ states
DATA
and the ‘File system’ ATA.
Check that the rest of the information for SLOT2 is reliable and no errors have been
detected.
?
Содержание AS/3 Compact Monitor
