Datex-Ohmeda AS/3 Compact Monitor, Техническое справочное руководство

Страница: 14 / 92

Datex-Ohmeda AS/3 Compact Monitor, CS/3 Compact Monitor
6
Document No. 896 623
1.2 Safety Precautions
1.2.1 Warnings
WARNING A WARNING indicates a situation in which the user or the patient may be in
danger of injury or death
Power Connection
•
Before connecting the power cord to the mains outlet, check that the local voltage and
frequency rating corresponds with the rating stated on the device plate on the rear panel of
monitor frame.
•
Connect the monitor to a three-wire, grounded, hospital grade receptacle. Do not remove
the grounding prong from the power plug.
•
Use intact power cord. Replace the cord if it is cracked, frayed, broken or otherwise
damaged.
•
Do not apply tension to the power cord. The cord may get broken.
•
Do not use extension cords or adapters of any type.
External Connection
•
Do not connect any other external devices to the monitor than those specified by Datex-
Ohmeda.
Fuse Replacement
•
Replace the fuse with a fuse of the same type and with the same rating.
Explosion Hazard
•
Do not use the monitor in the presence of flammable anesthetics.
Patient Safety
•
Do not perform any testing or maintenance on the monitor while it is being used on a
patient.
•
Use only cables and accessories approved by Datex-Ohmeda. Do not modify them. Other
cables and accessories may damage the monitor or interfere with measurement.
•
PACEMAKER PATIENTS: The impedance respiration measurement may cause rate changes
in Minute Ventilation Rate Responsive Pacemakers. Set the pacemaker rate responsive
mode off or turn the impedance respiration measurement off on the monitor.