Datex-Ohmeda AS/3 Compact Monitor, Техническое справочное руководство

Страница: 60 / 92

Datex-Ohmeda AS/3 Compact Monitor, CS/3 Compact Monitor
52
Document No. 896 623
Pin Signal
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44 Analog output, Ch 3
Analog input, Ch 1
Analog output, Ch 2
Analog output, Ch 0
Digital input 4
Analog input Ch 2
Digital input 5
Analog output, Ch 6
Analog output Ch 7
Not connected
Not connected
Not connected
Data 0, output
Data 1, output
Data 2, output
Data 3, output
Data 4, output
Data 5, output
Data 6, output
Data 7, output
Not connected
Fast analog ECG
Not connected
Busy, input
Paper End, input
Error, input
Strobe, output
GND
4.8.2 Analog Outputs
The analog output signals are:
Each signal is scaled in linear way between -5 ... +5 volts. The resolution consists of 4096 different
voltage levels. All signal levels are updated once in 10 ms.
OFF: Default state. No signal is present at analog output pin.
HR according to selected source (display value): The original scale 0...300 beats are scaled
between 0 and 3 volts.
ECGl, ECG2, ECG3: The original scale -5000 microvolts...+5000 microvolts is scaled between -5
and +5 volts.
P1 lre, P2 lre, P3 lre, P4 lre, P5 lre, P6 lre (Invasive pressure real-time values, low resolution): The
original scale -20 mmHg...+320 mmHg is scaled between -0.2 and +3.2 volts.
P1 hre, P2 hre, P3 hre, P4 hre, P5 hre, P6 hre (Invasive pressure real-time values, high resolution):
The original scale -20 mmHg...+50 mmHg is scaled between -2 and +5 volts.
Pleth: The original scale -100%...100% is scaled between -5 and +5 volts.